Sign In | Join Free | My infospaceinc.com
China TOBO STEEL GROUP CHINA logo
TOBO STEEL GROUP CHINA
TOBO GROUP TOBO International Trading(Shanghia)Co.,Ltd Tianda Oil Pipe Co., Ltd TOBO Pipeline Equipment Co.,Ltd TPCO & TISCO Pipe(Tianjin)Co.,Ltd.
Verified Supplier

9 Years

Home > Stainless Steel Elbow >

1/2" Curved Tube Elbow ASTM A40345 Stainless Steel 45 Degree Elbow Raw Material Equal To Pipe

TOBO STEEL GROUP CHINA
Trust Seal
Verified Supplier
Credit Check
Supplier Assessment

1/2" Curved Tube Elbow ASTM A40345 Stainless Steel 45 Degree Elbow Raw Material Equal To Pipe

  • 1
  • 2
  • 3

Brand Name : TOBO

Model Number : EL####001

Certification : BV/ABS/LR/TUV/DNV/BIS/API/PED

Place of Origin : CHINA

MOQ : 0.5-1 tons

Price : negotiable

Payment Terms : L/C, D/A, D/P, T/T, Western Union, MoneyGram

Supply Ability : 7500 tons per year

Delivery Time : According to the qty

Packaging Details : in plastic bags then in bundles

Thickness : standard schedule

Color : Customer's Requirement

Surface : As customer's requirement

Packing : inner poly bag,Plastic Bag+Carton,plywood case or pallet,According customer's requesment

Type : Elbow

Size : Customized Size

Standard : ANSI / ASME

Contact Now

1/2" Curved Tube Elbow ASTM A40345 Stainless Steel 45 Degree Elbow Raw Material Equal To Pipe

Chemical Composition

The chemical composition of each cast or furnace steel shall be determined and shall comply with the chemical composition requirements for each grade of material listed in the chemical composition table.

Tensile Properties

The tensile properties of the pipe fitting materials shall comply with the tensile properties requirements. Tests and reports shall be conducted in accordance with A370 methods and definitions.
For tensile testing, longitudinal or transverse cut specimens should be acceptable. Although tensile properties Table specifies the elongation requirements for the longitudinal and transverse specimens, it is not intended to be applicable at the same time. Instead, This intent that only the corresponding elongation requirements for specimens that are applicable in the direction are appropriate.

WP Grade Stainless Steel Pipe Fittings

Material under this standard named as WP Grade, and for each WP grade stainless steel, several categories of pipe fittings are included, to indicate that a seamless or welded structure is used. Class designations are also used to indicate non-destructive testing methods and the extent of non-destructive testing (NDE).

Heat treatment

For H grade steel, separate solution heat treatment are required for solution annealing. All pipe fittings should be supplied in heat treated condition. All welding work should be done before heat treatment. Fitting that have been machined directly from solution annealed forgings and bar stocks do not need to be annealed again.

ASTM A403 Standard Scope

The standard includes several grades of austenitic stainless steel alloys, and uses the WP or CR prefix to mark the grade of steel, depending on the applicable ASTM or MSS size and rated pressure standards.

ASTM A403 is designed for forged steel pipe fittings, Cast pipe fittings are not suitable. (Austenitic stainless steel castings are included in these standard, A351/A351M, A743/A743M and A744/A744M.)

Tensile Properties

The tensile properties of the pipe fitting materials shall comply with the tensile properties requirements. Tests and reports shall be conducted in accordance with A370 methods and definitions.
For tensile testing, longitudinal or transverse cut specimens should be acceptable. Although tensile properties Table specifies the elongation requirements for the longitudinal and transverse specimens, it is not intended to be applicable at the same time. Instead, This intent that only the corresponding elongation requirements for specimens that are applicable in the direction are appropriate.

ASTM A403 Stainless Steel Pipe Fittings

ASTM A403 Stainless Steel Pipe Fittings refers to the material of forged and rolled austenitic stainless fittings for pressure pipes. Common grades are WP304/L, WP316/L. They can be used into many fields as engineering industry, energy conversion plants etc.

Tensile test report made on the starting material shall notes:

• The starting material report shall demonstrate that the properties of the pipe fittings material meet the requirements of this standard, provided that the heat treatment of the initial material is the same as that of the pipe fittings material.
• If the initial material has not been tested, or if the heat treatment of the initial material is different from that of the pipe fittings, the fitting manufacturer shall conduct at least one tensile test per furnace steel on the material representing of the finished pipe fittings, and the heat treatment condition shall be the same as that of the pipe fittings represented.

Tensile Properties

The tensile properties of the pipe fitting materials shall comply with the tensile properties requirements. Tests and reports shall be conducted in accordance with A370 methods and definitions.
For tensile testing, longitudinal or transverse cut specimens should be acceptable. Although tensile properties Table specifies the elongation requirements for the longitudinal and transverse specimens, it is not intended to be applicable at the same time. Instead, This intent that only the corresponding elongation requirements for specimens that are applicable in the direction are appropriate.

Standard Specification for Wrought Austenitic Stainless Steel Piping Fittings

Abstract

This specification covers the standard for wrought austenitic stainless steel fittings for pressure piping applications. The material for fittings shall consist of forgings, bars, plates, or seamless or welded tubular products. Forging or shaping operations shall be performed by hammering, pressing, piercing, extruding, upsetting, rolling, bending, fusion welding, machining, or by a combination of two or more of these operations. All fittings shall undergo heat-treatment. Chemical and product analyses shall be performed and shall conform to the required chemical composition in carbon, manganese, phosphorus, sulfur, silicon, chromium, molybdenum, and titanium. Tension test shall be done on the fitting material to determine the tensile properties such as yield strength and tensile strength. Fittings supplied under this specification shall be examined visually for surface discontinuities, surface checks, and mechanical marks.

1. Scope

1.1 This specification covers wrought stainless steel fittings for pressure piping applications.2

1.2 Several grades of austenitic stainless steel alloys are included in this specification Grades are designated with a prefix, WP or CR, based on the applicable ASME or MSS dimensional and rating standards, respectively.

1.3 For each of the WP stainless grades, several classes of fittings are covered, to indicate whether seamless or welded construction was utilized. Class designations are also utilized to indicate the nondestructive test method and extent of nondestructive examination (NDE). Table 1 is a general summary of the fitting classes applicable to all WP grades of stainless steel covered by this specification. There are no classes for the CR grades. Specific requirements are covered elsewhere.

1.4 This specification is expressed in both inch-pound units and in SI units. However, unless the order specifies the applicable “M” specification designation (SI units), the material shall be furnished to inch-pound units.

1.5 The values stated in either SI units or inch-pound units are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.

1.6 This specification does not apply to cast steel fittings. Austenitic stainless steel castings are covered in Specifications A351/A351M, A743/A743M, and A744/A744M.

Types of Grade 316 Stainless Steel Pipe Tee manufactured as per Hot forming or Extrusion Method & Cold forming process

A403 WP316 Lateral Tee ASTM A403 WP316 Equal Tee
ASTM A403 WP316 Stainless Steel Equal Tee A403 Gr WP316 Lateral Tee
Grade WP316 Stainless Steel Lateral Tee Stainless Steel 316 Equal Tee
ASME SA403 316 Stainless Steel Equal Tee ASTM A403 WP316 Stainless Steel Lateral Tee
ASME SA403M Stainless Steel 316 Lateral Tee Stainless Steel Grade WP316 Equal Tee
WP316 Stainless Steel Equal Tee ASME SA 403 WP316 Lateral Tee

Types of Grade 316 Stainless Steel Reducer manufactured as per Hot forming or Extrusion Method & Cold forming

A403 WP316 Concentric Reducer ASME SA 403 WP316 Eccentric Reducer
ASTM A403 WP316 Eccentric Reducer ASME SA403 316 Stainless Steel Concentric Reducer
ASTM A403 WP316 Stainless Steel Concentric Reducer Stainless Steel 316 Eccentric Reducer
ASTM A403 WP316 Stainless Steel Eccentric Reducer ASME SA403M Stainless Steel 316 Concentric Reducer
Grade WP316 Stainless Steel Concentric Reducer A403 Gr WP316 Eccentric Reducer
Stainless Steel Grade WP316 Eccentric Reducer WP316 Stainless Steel Concentric Reducer

Varities of Grade 316 Stainless Steel Stub End manufactured as per Hot forming or Extrusion Method & Cold forming process

ASTM A403 WP316 Stub End
WP316 ASTM A403 Long Stub End ASTM A403 WP316 Stainless Steel Short Stub End
ASTM A403 Stainless Steel 316 Short Stub End Grade WP316 Stainless Steel Long Stub End
Stainless Steel WP316 Long Stub End ASME SA403 316 Stainless Steel Short Stub End
Stainless Steel ASTM A403 WP316 Short Stub End ASME SA403M Stainless Steel 316 Long Stub End
Stainless Steel UNS S30403 Long Stub End WP316 Stainless Steel Short Stub End
ASTM A403 WP316 Short Stub End ASTM A403 Grade WP316 Long Stub End
ASME SA403 Stainless Steel 316 Long Stub End ASME SA403M Stainless Steel WP 316 Short Stub End
Stainless Steel 316 Short Stub End Werkstoff No 1.4307 Stainless Steel Long Stub End
ASTM A403 Stainless Steel WP316 Long Stub End ANSI B16.9 Stainless Steel 316 Short Stub End

Related Products

1/2" Curved Tube Elbow ASTM A40345 Stainless Steel 45 Degree Elbow Raw Material Equal To Pipe

1/2" Curved Tube Elbow ASTM A40345 Stainless Steel 45 Degree Elbow Raw Material Equal To Pipe

1/2" Curved Tube Elbow ASTM A40345 Stainless Steel 45 Degree Elbow Raw Material Equal To Pipe

FAQ

1.How can I get the price?
-We usually quote within 24 hours after we get your inquiry(Except weekend and holidays).
-If you are very urgent to get the price, please email us
or contact us in other ways so that we can offer you a quote.
2. Can I buy samples placing orders?
-Yes.Please feel free to contact us.
3.What is your lead time?
-It depends on the order quantity and the season you place the order.
-Usually we can ship within 7-15 days for small quantity,
and about 30 days for large quantity.
4.What is your payment term?
-T/T,Western Union,MoneyGram,and Paypal.This is negotiable.
5.What is the shipping method?
-It could be shipped by sea,by air or by express(EMS,UPS,DHL,TNT,FEDEX and ect).
Please confirm with us before placing orders.
6.How do you make our business long-term and good relationship?
-1. We keep good quality and competitive price to ensure our customers benefit ;
-2. We respect every customer as our friend and we sincerely do business
and make friends with them,no matter where they come from.

Product Tags:

Curved Stainless Steel Tubing Elbows

      

Stainless Steel 45 Degree Elbow 1/2"

      

Equal Stainless Steel 45 Degree Elbow

      
Quality 1/2" Curved Tube Elbow ASTM A40345 Stainless Steel 45 Degree Elbow Raw Material Equal To Pipe for sale

1/2" Curved Tube Elbow ASTM A40345 Stainless Steel 45 Degree Elbow Raw Material Equal To Pipe Images

Inquiry Cart 0
Send your message to this supplier
 
*From:
*To: TOBO STEEL GROUP CHINA
*Subject:
*Message:
Characters Remaining: (0/3000)